Barracuda 1300x900 51.1" x 34.4"

Price: $8900.00
  • SKULSR_LO13900ZR


- +

The LOBarracuda  is a professional grade engraving/cutting machine with the latest 4th generation DSP technology.

An air cooling system is installed inside of the LO-Barracuda  to improve performance. The laser head is installed on a roller wheel so higher speed can be achieved.  

The LO-Barracuda  comes with the powerful and user-friendly software that enables the user to work right after the machine is set up. If you need to handle more complicated, detailed artwork our software is capable of integrating CorelDRAW, AutoCAD, Inkscape and more. With these features, the LO-Barracuda  will engrave/etch whatever you can dream up and the 100 Watt Laser Tube is powerful enough to cut through 1” plywood!  What you see on the screen is what you will get from your project!

The software is capable of handling vector and raster graphics at the same time through different layers of setup. A list of files supported: DXF, PLT, DST, DSB, BMP, GIF, JPG, PNG, MNG, ICO CUR, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW.

The LO-Barracuda comes with a "Power Z Table"! Now you can control the Z table up/down to accommodate various material sizes -up to 150 pounds! You can also take out the honeycomb flatbed to give you up to another 6" of room/depth.

Optional High Precision Rotary (model ECNC-RTY9001) is available to make it capable of engraving round objects like wine bottles, wood trim, cups, etc.. Almost any round shaped object is possible!  The High Precision Rotary (ECNC-RTY9001) is $425.



Shipping & Handling to US customers in 48 states that ca range from $850 to $1200 (depending on your location). When you check out our shipping estimator will tell you the actual shipping cost to your location. 


Note: we accept bank transfer or money order only. Full payment is required prior to shipment.


Return/Refund Policy is HERE

CO2 Power: 80, 100, 130, 150W
Tube Trigger Volt: 28KV
Tube Operating Volt: 22KV
Operating voltage: AC110V, Optional AC220V, 5A, 50/60Hz
Laser tube Current: 26-28 mA
Laser tube length: Varies based on choice
Working area: 1300mm x 900mm (51.2" x 35.5") with +/- 2mm
Pass-through size:(back): 54"x1.25"
Beam combiner built in (red dot laser pointer):Yes
Power Z table: Yes (254mm/10")
Precision: 0.01mm , resolution: 0.05mm
Speed: 750mm/s for X , 500mm/s for Y during engraving,
Wood cutting: up to 25mm (1"), 12mm(0.5") acrylic.
Water Protection: Yes
DSP Controller: Comes with an LCD unit for motion control and power control
OS: Windows 2000/XP/Vista/7/8/10 (32 bit/64 bit). Mac with optional Lightburn software
Interface: USB port or Ethernet (RJ45)
USB memory drive support: Yes
PPI support: Yes
Micro step panning: Yes
Real-time simulation: Yes
Cooling: Water Cooler (not included - we recommend the LightObject Brand of Chillers)
Application supported: CorelDRAW X4,X5,X6,X7,X8 AutoCAD 2004 or higher version, Inscape and more!
Machine Size: 1905mm*1555.75mm*984.25mm (75" W x 61.25" D x 38.75" H)
Shipping Dimension: 79"x 65"x 47"
NET Weight:431Kg/950lb (shipping 500kg/1100lbs)

Warranty: 2 years limited warranty, 1 year on laser tube.

Average rating 10 out of 10 ( based on 1 review )

My first laser

Review by Steve Phang on 3/4/2020

I had been looking for a laser machine for a while. I did not want to go with Ebay/China because a lot of bad experiences people had such as, machines coming in broken and lack of support from sellers. I went with Lightobject since they are local to me. I chose them since customer support and training is important to me. I went to their showroom and Macro demo on the laser. He is very knowledgeable and explain about the machine and its’ capabilities. My 100watt laser worked without any issue since they dropped it off and configured it. They included hands on training for my laser. Their machine is a workhorse, sometime I run the laser for 12 hours long and have no issue with it. Their support is amazing, always have time to answer my questions, and guide me to the right direction. They don’t even mind for some of my stupid questions. I highly recommend Lightobject if you need a laser machine or parts.

Write a Review